mlisten — display multicast pings from the ParaStation MPI daemon psid(8)
mlisten [-dv?] [-m MCAST
] [-p PORT
] [-n IP
] [-# NODES
] [--usage]
Display the multicast pings the ParaStation MPI daemon psid(8) is emitting continuously. These pings are displayed by spinning bars.
Each ping received from node N lets the Nth bar spin around one more step. For each node never received a multicast ping from a '.' is displayed.
ParaStation MPI by default no longer uses multicast messages. Thus, no multicast messages will be ever received and displayed using the default configuration!
-d
, --debug
Activate the debugging mode. This will disable the spinning bars. Instead a detailed message about each received multicast ping is displayed.
-m
, --mcast=MCAST
Listen to multicast group MCAST
. Set
this to the value of MCastGroup
in the ParaStation MPI
configuration file parastation.conf(5). The default
is 237, which is also the default within psid(8).
-p
, --port=PORT
Listen to UDP port PORT
. Set this
to the value of MCastPort
in the ParaStation MPI
configuration file parastation.conf(5). The default
is 1889, which is also the default within psid(8).
-n
, --network=IP
Listen on the network interface with address
IP
. The default is to listen on any
interface. IP
is the IP address of the
network interface in dot notation.
-#
, --nodes=NODES
Display information for
NODES
nodes. The default is 128,
i.e. 128 nodes.
-v
, --version
Output version information and exit.
-?
, --help
Show a help message.
--usage
Display a brief usage message.